Does VM Fusion Version 8.5.10 (7527438) work with MacOS Mojave 10.14.2. ?
(German versions)
Today I updated Mac with Mojave.
But now VW Fusion seems to work (it opens, and features are available)
BUT my Windows 10 does not open.
If VM Fusion 8.5.10 doesn't NOT work with MacMojave, which error message would I get?
Thanks in advance
Hi,
I would be grateful for the assistance becouse I do not have any idea what to do anymore.
We are in process of deploying on-premisse workspace one.
I have configure IDM and IDMC and deployed AW device services in DMZ with all services on it and AW admin console on another server in internal network with all services.
AWCM service is installed and it is accessible with test link
https://{server Url}:2001/awcm/statistics
https://{server Url}:2001/awcm/status
As it is on-premisse deployment I have folow instruction from AW Installation Guide and
VMware Documentation Library create and install AWCM Secure Channel Installer
Now when I am trying to enable AWCM from console in SiteURLs everithing is gray out and it says when we are trying to test connection that AWCM is not enabled for this AirWatch instance.
Thank you in advance!
Hi Guys,
I got a Skyline appliance 1.4.0 Build 9405761. It was working perfectly and suddenly stopped working for no reason. Checking the booting process I can see the following:
I tried the following with no luck
Hit SHIFT+UP or SHIFT+PGUP in the console and you'll see that a device needs to be checked for errors. Put your skyline root password in and then type "fsck -y /dev/log_vg/log" and it'll do a file system check. After that, just reboot the appliance and you'll be back up. If you're not, check the output again for any other mounts that need to be checked and perform the same.
Any idea will be highly appreciated.
Hi, I am trying to restart the vCenter Web Client service and noticed that the options are grayed out. vCenter6.5 is installed on Windows 2012R2.
Please refer the attachment.
I am seeing some strange behavior with the latest 4.10 client.
If I try and start the usbarbitrator service during init, it will segfault.
A subsequent run will successfully start.
If I don't try during init, and just manually kick off the service after boot finishes, it also works
It only seg faults if I try during init.
This is different behavior than 4.9, which always worked.
Hello Everyone,
I was wondering if someone might have run into an issue with Mozilla Firefox on AppStack not working. What is happening is that after I created an appstack with Firefox on it everything seem to work great for a day or two however then all of the sudden it won't launch at all. It happens to multiple users including myself. I'm using UEM to capture user information using the UEM template available here on VMware site. Besides that there are no other alterations to the program. If I install Firefox on master image it works flawlessly but I don't really want that on my image. The Firefox versions I tried is regular Firefox 62 and Firefox 60.2 ESR. The OS I'm on is Windows 10 1607 LTSB . THere not a single Event in the event viewer that could point to what is happening here.
Any help would be much appreciated
Hi there,
I am running the below commands from pow
$esxcli = Get-EsxCli -VMHost $esxhosts
$esxcli.storage.nmp.satp.rule.remove($false,"tpgs_on","HP 3PAR Custom Rule",$null,$null,"VV",$null,"VMW_PSP_RR","iops=1","VMW_SATP_ALUA",$null,$null,"3PARdata") | Out-Null
$esxcli.storage.nmp.satp.rule.add($false,"tpgs_on","HP 3PAR Custom Rule",$null,$null,$null,"VV",$null,"VMW_PSP_RR","iops=1","VMW_SATP_ALUA",$null,$null,"3PARdata") | Out-Null
Error:
PS C:\Windows\system32> $esxcli.storage.nmp.satp.rule.remove($false,"tpgs_on","HP 3PAR Custom Rule",$null,$null,"VV",$null,"VMW_PSP_RR","iops=1","VMW_SATP_ALUA",$null,$null,"3PARdata")
Cannot find an overload for "remove" and the argument count: "13".
At line:1 char:1
+ $esxcli.storage.nmp.satp.rule.remove($false,"tpgs_on","HP 3PAR Custom ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodException
+ FullyQualifiedErrorId : MethodCountCouldNotFindBest
Cannot find an overload for "add" and the argument count: "14".
At P:\Ankur\Ankur Scripts\Host-Get-AdvancedSetting-ChangeAttribute.ps1:40 char:3
+ $esxcli.storage.nmp.satp.rule.add($false,"tpgs_on","HP 3PAR Custom ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodException
+ FullyQualifiedErrorId : MethodCountCouldNotFindBest
Hi,
I am trying to get Windows 10 Pro N working on our VMware instance however am having a few issues with disk usage throttling at "100%" (~2.5MB/s - ~5MB/s) with barely anything running.
The "top" usage of disk usage according to Task Manager is usually "System" and when opening file location, it points to ntoskrnl.exe.
Things I've tried:
Details of our VMware instance:
I'm not really sure how else to proceed to fix this issue. Would upgrading to ESXI 6.7 help?
NB, I do not have any issues with using Windows 7, only Windows 10 it seems.
Thanks
Hi!
I have host (esxi 6.0) that are disconnected from VC. I began to study the problem .
The service hostd don't start.
[root@esx-35:/var/run/vmware] /etc/init.d/hostd restart
watchdog-hostd: PID file /var/run/vmware/watchdog-hostd.PID does not exist
watchdog-hostd: Unable to terminate watchdog: No running watchdog process for hostd
sh: you need to specify whom to kill
Ramdisk 'hostd' with estimated size of 1803MB already exists
[root@esx-35:/var/run/vmware] /opt/vmware/vpxa/bin/vmware-watchdog -r hostd
-sh: /opt/vmware/vpxa/bin/vmware-watchdog: not found
[root@esx-35:/var/run/vmware] /sbin/watchdog.sh -r hostd
nothing
[root@esx-35:/var/run/vmware] ls -l vmware-hostd.PID watchdog-hostd.PID
ls: watchdog-hostd.PID: No such file or directory
-rw-r--r-- 1 root root 8 Jan 15 13:46 vmware-hostd.PID
hostd.log
2019-01-15T10:00:16.218Z error hostd[676C1B70] [Originator@6876 sub=SoapAdapter.HTTPService.HttpConnection] Failed to read header on stream <io_obj p:0x667580a4, h:36, <TCP '0.0.0.0:0'>, <TCP '0.0.0.0:0'>>: N7Vmacore15SystemExceptionE(Connection reset by peer)
2019-01-15T10:02:59.391Z error hostd[67CC4B70] [Originator@6876 sub=SoapAdapter.HTTPService.HttpConnection] Failed to read header on stream <io_obj p:0x6665fc6c, h:31, <TCP '0.0.0.0:0'>, <TCP '0.0.0.0:0'>>: N7Vmacore15SystemExceptionE(Connection reset by peer)
2019-01-15T10:03:24.108Z error hostd[674BAB70] [Originator@6876 sub=Solo.VmwareCLI opID=esxcli-22-71b7 user=root] GetPrimitiveParam: Cannot find (help)
2019-01-15T10:03:24.408Z error hostd[674FBB70] [Originator@6876 sub=Solo.VmwareCLI opID=esxcli-a0-71cb user=root] GetPrimitiveParam: Cannot find (help)
2019-01-15T10:03:24.926Z error hostd[67CC4B70] [Originator@6876 sub=SoapAdapter.HTTPService.HttpConnection] Failed to read header on stream <io_obj p:0x67a3a74c, h:34, <TCP '0.0.0.0:0'>, <TCP '0.0.0.0:0'>>: N7Vmacore15SystemExceptionE(Connection reset by peer)
2019-01-15T10:03:24.977Z error hostd[67CC4B70] [Originator@6876 sub=Solo.VmwareCLI opID=esxcli-e7-71db user=root] GetPrimitiveParam: Cannot find (help)
2019-01-15T14:47:58.335Z warning -[FFA75B20] [Originator@6876 sub=Default] Estimated fds limit 4864 > 4096 max supported by setrlimit. Setting fds limit to 4096
2019-01-15T14:47:58.336Z warning hostd[FFA75B20] [Originator@6876 sub=Default] Unrecognized log/level '' using 'info'
2019-01-15T14:47:58.380Z warning hostd[FFA75B20] [Originator@6876 sub=Hostsvc] Removing duplicate pools.xml entry 'resourcePool[0003]'
2019-01-15T14:47:58.380Z warning hostd[FFA75B20] [Originator@6876 sub=Hostsvc] Destroying unregistered VMkernel resource group 'host/user/pool2/pool1'
2019-01-15T14:47:58.386Z warning hostd[FFA75B20] [Originator@6876 sub=Hostsvc] Destroying unregistered VMkernel resource group 'host/user/pool2/pool1/vmx.15702277'
2019-01-15T14:47:58.386Z warning hostd[FFA75B20] [Originator@6876 sub=Hostsvc] Destroying unregistered VMkernel resource group 'host/user/pool2/pool1/vmx.15702277/worldGroup.15702277'
I see this KB
https://kb.vmware.com/s/article/1005566
https://kb.vmware.com/s/article/1003490?1=
In my case i use LACP. In KB 1003490 i see this:
I use "services.sh restart" command on this host and on others hosts, Other hosts are ok, but this host are gone crazy)
Ony ideas?
P.S. i cant reboot host.
I seem to be having an issue recomposing and was curious where the issue might be. Not sure if it points to the Horizon servers or the Vsphere hosts. Lately when i try to recompose a Linked Clone pool it takes forever for the cloning process. typically when i recompose it takes only a few minutes for the "cloning" process to show up in vcenter. Now when i try to recompose a pool it takes well over an hour for that same process to show up. I seem to have an issue but not sure where to look. Horizon composer logs look OK. No errors. Not sure where to start looking going forward. Any assistance is appreciated.
Perry
I am trying to update the NSX Manager from version 6.2.4 to 6.4.2, but after loading the file, the screen got stuck in Verifying uploaded file,I have already tested it with several browsers and the result is the same.
Has anyone had this problem?
We have ESXi running. I wanted to move the VM with the original snapshots to a new server. Without VCenter it looks like the only way is to scp the entire directory to the new server. I did this for 4 servers. one works great. The other 3 allow me to create snapshots, but does not allow me to remove any snapshots. I keep getting "This locked snapshot cannot be deleted.".
I searched some posts/questions and nothing has really helped. Not sure what to do really. I guess I could try fully removing the servers and copying them again. I didn't want to do this if I didn't have to.
Thanks in advance for any help.
KM
Hello,
Since several months, our users experiences disconnections.
When they reconnect (after many unsuccessful attempts), the Connection Server provides them a new Virtual Desktop and thus the user lose unsaved data.
Briefly, we notice in the Connection Server console that the status of the old virtual machine changed to Agent Unreachable then it gets refreshed.
We experienced this issue on Horizon version 7.2 and upgraded to version 7.4 but we still experience the issue.
As suggested by VMWare Support, we upgraded on test pools the Horizon agent to version 7.5.1 but we are still experiencing the issue.
We provided VMWare Support with log bundle.
Can anyone advise on this issue?
For information,
We are running Horizon version 7.4 which provides non-persistent virtual desktops
Application are deployed with App-Volume version 2.14.0.
Roaming Profile are managed with UEM version 9.4.
Best Regards,
Hello!
Recently I first time installed ESXi 6.5 with Net55-r8168 driver added to ISO. I have 3 NICs in the computer, but I see only two of them, vmnic0 is missing. Here is console output:
[root@localhost:~] lspci -v | grep -A1 -i ethernet
0000:03:00.0 Ethernet controller Network controller: D-Link System Inc DGE-560T PCI Express (x1) Gigabit Ethernet Adapter [vmnic2]
Class 0200: 1186:4300
--
0000:04:00.0 Ethernet controller Network controller: Realtek Semiconductor Co., Ltd. P8P67 and other motherboards [vmnic1]
Class 0200: 10ec:8168
--
0000:06:00.0 Ethernet controller Network controller: D-Link System Inc DGE-528T PCI Gigabit Ethernet Adapter [vmnic0]
Class 0200: 1186:4300
[root@localhost:~] esxcfg-nics -l
Name PCI Driver Link Speed Duplex MAC Address MTU Description
vmnic1 0000:04:00.0 r8168 Down 0Mbps Half 00:0b:0e:0f:00:ed 1500 Realtek Semiconductor Co., Ltd. P8P67 and other motherboards
vmnic2 0000:03:00.0 r8168 Up 1000Mbps Full c4:a8:1d:7d:a0:fa 1500 D-Link System Inc DGE-560T PCI Express (x1) Gigabit Ethernet Adapter
I thought Net55-r8168 has a driver for D-LinkDGE-528T, the card has the same class as DGE-560T... So I don't understand what's going on, cause I have little to no experience with ESXi and *nix in general. How to get it working from here?
Still have no machines in this installation, so it could be easily reinstalled.
Hi, I'm working on a windows 10 image, and i have installed Office 365 on an appstack.
When my testuser is logged in, he got a message.
When i go to Windows Settings - Apps - Default Apps:
I'm not able to choose a default app for E-Mail.
If i click +, it sats that there are no app installed for this kind of file or protocol.
I have created a ADM file for GPO that should do the magic: https://support.microsoft.com/en-us/help/2008044/how-to-configure-the-default-e-mail-client-using-group-policy
With no luck.
Anyone that have a solution for this?
We are running Horizon UEM version 9.3.0, appvol 2.13, Horizon Agent 7.3.2
This is a home lab so the setup is pretty simple.
HPDL360 Gen 7 server
Gigabit switch
Cheap NAS device.
When I migrate a guest off the local disk or clone to the NFS device traffic is extremely slow (5k kB/sec). If I scp the guests over I get expected throughput (90k kB/sec). And if I migrate back from the NFS device to the local disk I get "better" throughput (60k kB/sec). The only time I get extremely poor performance is using storageVmotion or when cloning to the NFS device. I just don't understand why I am getting such poor performance in these cases. Any thoughts?
I am getting errors re mediating profiles stating the "option.option has been changed from its expected default value". But there is no "option.option" in the settings. My workaround is to just take a profile from a host that already has this error and apply it to the other hosts in the cluster.
Thanks for the help.
I see Solaris 11.4 is supported under ESX, but no listing for under Workstation 14 or 15.
Where do we stand on getting support for Solaris 11.4 under VMWare Workstation Pro 15?
I'd hate to have to revert to using Oracle VirtualBox just because VMWare can't figure out how to run 11.4...
But if VMWare cannot deduce how to do this, perhaps I'd be better off with VirtualBox.
I'm designing a kiosk app which can let users build blueprints. I cannot find the API which can retrieve a list of VM templates in the repository. Specifically, is there a REST API to replicate this feature in vRA? Or do I need to use vSphere API to retrieve that level of information?
Здравствуйте. Возможно ли восстановление vmdk файла? есть vsphere vcenter 5.5. Сотрудник пытаясь увеличить размер жесткого диска каким то чудом умудрился подключить его как второй жесткий диск и вм перестала стартовать. Отключив второй жесткий диск (без удаления его с датастора, так как он ссылался на тот же физический файл что и первый жесткий диск) и стартанув машину увидел что данных нет. Диск девственно чист. Попытки подключить его вторым диском к другой вм и прогнать программами на поиск удаленных разделов ничего не дали. Возможно ли что диск пересоздался с удалением данных и возможно ли вытащить хоть что-то?