Hi every one,

Actually I am using  vSphere Data Protection 6.1.2 to back up our virtual machines and I am experiencing an issue with one VM. The job log begins at 21:30 and at 22:30

shows the first error.

2016-11-11T22:29:26.067+06:00 avvcbimage Info <16041>: VDDK:DISKLIB-LIB   : numIOs = 2950000 numMergedIOs = 0 numSplitIOs = 0

2016-11-11T22:30:04.974+06:00 avvcbimage Info <16041>: VDDK:DISKLIB-LIB   : numIOs = 3000000 numMergedIOs = 0 numSplitIOs = 0

2016-11-11T22:30:10.538+06:00 avvcbimage Info <40654>: isExitOK()=169

2016-11-11T22:30:10.538+06:00 avvcbimage Info <16022>: Cancel detected(externally cancelled by Administrator), isExitOK(0).

2016-11-11T22:30:10.538+06:00 avvcbimage Info <40654>: isExitOK()=169

2016-11-11T22:30:10.538+06:00 avvcbimage Info <16022>: Cancel detected(externally cancelled by Administrator), isExitOK(0).

2016-11-11T22:30:10.538+06:00 avvcbimage Info <9746>: bytes submitted was 197065048064

2016-11-11T22:30:10.540+06:00 avvcbimage Info <9772>: Starting graceful (staged) termination, MCS cancel (wrap-up stage)

2016-11-11T22:30:10.551+06:00 avvcbimage Info <19692>: Cancelled by MCS with timeout=0 sec

2016-11-11T22:30:10.635+06:00 avvcbimage Error <0000>: [IMG0010] pax_container::endfile(virtdisk-flat.vmdk,197065048064) returned problem:24

2016-11-11T22:30:10.638+06:00 avvcbimage Info <0000>: [IMG0010] pax_container::enddir returned problem:24

2016-11-11T22:30:10.638+06:00 avvcbimage Info <40654>: isExitOK()=169

2016-11-11T22:30:10.638+06:00 avvcbimage Info <16022>: Cancel detected(externally cancelled by Administrator), isExitOK(0).

2016-11-11T22:30:10.638+06:00 avvcbimage Info <12032>: backup ([Silverxxx] server-xxx/server-xxx_2.vmdk) terminated 307200.00 MB

2016-11-11T22:30:10.638+06:00 avvcbimage Info <40654>: isExitOK()=169

2016-11-11T22:30:10.638+06:00 avvcbimage Error <0000>: [IMG1003] Backup of [Silverxxx] server-xxx/server-xxx.vmdk failed

2016-11-11T22:30:10.650+06:00 avvcbimage Info <16041>: VDDK:VixDiskLib: VixDiskLib_Close: Close disk.

2016-11-11T22:30:16.162+06:00 avvcbimage Info <6688>: Process 15025 (/usr/local/avamarclient/bin/avtar) finished (code 163: externally cancelled)

2016-11-11T22:30:16.162+06:00 avvcbimage Warning <6690>: CTL workorder "Servers xxx-Servers xxx-1478925000009" non-zero exit status 'code 163: externally cancelled'

2016-11-11T22:30:26.464+06:00 avvcbimage Info <9679>: Virtual disk connection to '[Silverxxx] server-xxx/server-xxx_2.vmdk' has been closed

2016-11-11T22:30:26.464+06:00 avvcbimage Info <40654>: isExitOK()=169

2016-11-11T22:30:26.464+06:00 avvcbimage Info <16022>: Cancel detected(externally cancelled by Administrator), isExitOK(0).

2016-11-11T22:30:26.464+06:00 avvcbimage Info <16052>: Terminating backup of all remaining virtual disks

2016-11-11T22:30:26.464+06:00 avvcbimage Info <16041>: VDDK:VixDiskLib: VixDiskLib_Disconnect: Disconnect.

2016-11-11T22:30:26.487+06:00 avvcbimage Info <16041>: VDDK:VixDiskLib: VixDiskLib_Cleanup: Remove previous mount points and clean up .

2016-11-11T22:30:26.487+06:00 avvcbimage Info <16041>: VDDK:VixDiskLib: VixDiskLib_Connect: Establish connection.

2016-11-11T22:30:26.487+06:00 avvcbimage Info <16041>: VDDK:VixDiskLib: Resolve host.

2016-11-11T22:30:26.488+06:00 avvcbimage Info <16041>: VDDK:MemoryDbMappingsExpire: Expiring SSL ID mapping, hostname 192.168.0.xxx SSL ID 0d:d5:20:4d:8f:41:4c:f9:c5:ab:ff:2b:b0:e2:e7:18:dc:c7

2016-11-11T22:30:26.488+06:00 avvcbimage Info <16041>: VDDK:MemoryDbMappingsExpire: Expiring SSL ID mapping, hostname 192.168.1.xxx SSL ID 4e:89:f7:1d:b2:d4:81:96:b3:f4:04:20:56:a4:1d:ff:e4:a1

2016-11-11T22:30:26.703+06:00 avvcbimage Info <16041>: VDDK:VixDiskLib: VixDiskLib_Disconnect: Disconnect.

2016-11-11T22:30:26.703+06:00 avvcbimage Info <9672>: Disconnected from VM

2016-11-11T22:30:26.703+06:00 avvcbimage Info <8701>: Closing pax stream

2016-11-11T22:30:26.730+06:00 avvcbimage Info <40645>: getActiveTaskCount prior to snapshot removal: CreateSnapshot=0 RemoveSnapshot=0 ImageTask=0 otherTask=0

2016-11-11T22:30:26.740+06:00 avvcbimage Info <41147>: no active snapshot removal tasks for vm moref 'vm-169'

2016-11-11T22:30:26.740+06:00 avvcbimage Info <14642>: Deleting the snapshot 'VDP-14789250258070daefa9130627093324fe5670a559235298f8', moref 'snapshot-1352'

2016-11-11T22:30:26.740+06:00 avvcbimage Info <0000>: SnapshotManager: deletesnapshot, snapshot-1352

2016-11-11T22:30:26.740+06:00 avvcbimage Info <0000>: SnapshotManager: POST to /snapshotmanager/snapshot/snapshot-1352/action/delete, payload({

  "maxAttempts": -1})

2016-11-11T22:30:27.133+06:00 avvcbimage Info <0000>: AvSnapMgr::postData Succeeded

2016-11-11T22:30:27.133+06:00 avvcbimage Info <0000>: POST: curl_easy_getinfo - passed. HTTPCode: 202

2016-11-11T22:30:27.133+06:00 avvcbimage Info <0000>: AvSnapMgr::postData Succeeded

2016-11-11T22:30:27.133+06:00 avvcbimage Info <0000>: avSnapMgr::deleteSnapshot returned: HTTP/1.1 202 Accepted

Location: https://127.0.0.1:8543/snapshotmanager/task/task-8813

Content-Length: 0

Date: Sat, 12 Nov 2016 05:30:27 GMT

Connection: close

Server: Avamar

...

...

...

2016-11-11T21:30:46.003+06:00 avtar Info <5946>: File system character encoding is UTF-8.

2016-11-11T21:30:46.003+06:00 avtar Info <5588>: - Creating process lock file "/usr/local/avamarclient/var/VmImage7_avtar.lck", pid=15025

2016-11-11T21:30:46.004+06:00 avtar Info <8940>: Starting back up at 2016-11-11 21:30:46 MST as "root" on "dpxxx" (4 CPUs) [7.2.180-98]

2016-11-11T21:30:46.004+06:00 avtar Info <5731>: Not using include/exclude list

2016-11-11T21:30:46.004+06:00 avtar Info <8474>: - Log file path: Servers xxx-1478925000009-8070daefa9130627093324fe5670a559235298f8-3016-vmimagew_avtar.log

2016-11-11T21:30:46.004+06:00 avtar Info <6555>: Initializing connection

2016-11-11T21:30:46.004+06:00 avtar Info <5552>: Connecting to Avamar Server (dpxxx.xxx.corp)

2016-11-11T21:30:46.004+06:00 avtar Info <5554>: Connecting to one node in each datacenter

2016-11-11T21:30:46.040+06:00 avtar Info <5993>: - Connect: Connected to 192.168.1.160:29000, Priv=0, SSL Cipher=ECDHE-RSA-AES256-GCM-SHA384

2016-11-11T21:30:46.075+06:00 avtar Info <5993>: - Datacenter 0 has 1 nodes: Connected to 192.168.1.160:29000, Priv=0, SSL Cipher=ECDHE-RSA-AES256-GCM-SHA384

2016-11-11T21:30:46.080+06:00 avtar Info <5581>: Logging in on connection 0 with Session Ticket

2016-11-11T21:30:46.080+06:00 avtar Info <5582>: Avamar Server login successful

2016-11-11T21:30:46.080+06:00 avtar Info <5018>: - Session ID: 0

2016-11-11T21:30:46.083+06:00 avtar Info <10632>: Using Client-ID='8070daefa9130627093324fe5670a559235298f8'

2016-11-11T21:30:46.083+06:00 avtar Info <5550>: Successfully logged into Avamar Server [7.2.80-98] (Compression enabled)

2016-11-11T21:30:46.083+06:00 avtar Info <7562>: Back up of stdin on server "dpxxx.xxx.corp" for /vcxxx.xxx.corp/VirtualMachines/server-xxx_UB0KAkp4C8r7ismoqsJ0pw

2016-11-11T21:30:46.096+06:00 avtar Info <5586>: Loading cache files from /usr/local/avamarclient/var

2016-11-11T21:30:46.096+06:00 avtar Info <5769>: Filecache is disabled.

2016-11-11T21:30:46.096+06:00 avtar Info <8650>: Opening hash cache file '/usr/local/avamarclient/var/VmImage7_p_cache.dat'

2016-11-11T21:30:48.097+06:00 avtar Info <5573>: - Loaded hash cache file (25,166,368 bytes)

2016-11-11T21:30:48.218+06:00 avtar Info <6426>: Done loading cache files

2016-11-11T21:30:48.219+06:00 avtar Warning <18692>: Changed streamformat-out to none since raw format is only for DDR use

2016-11-11T21:30:48.219+06:00 avtar Info <6995>: Parsing 'pax' stream format from stdin

2016-11-11T21:30:48.219+06:00 avtar Info <10818>: Backstream creating root backstreamdir object

2016-11-11T21:30:48.219+06:00 avtar Info <8648>: Directory elements will be sorted: No

2016-11-11T21:30:48.219+06:00 avtar Info <8649>: Sub-file change blocks enabled: No

2016-11-11T21:45:47.229+06:00 avtar Info <8688>: Status 2016-11-11 21:45:47, 9 files, 84.77 GB (9 files, 87.32 MB, 0.10% new) 393MB  81% CPU  91026768896 input bytes, (1 open files) VMFiles/2/virtdisk-flat.vmdk

2016-11-11T22:00:49.034+06:00 avtar Info <8688>: Status 2016-11-11 22:00:49, 12 files, 192.7 GB (12 files, 88.32 MB, 0.04% new) 393MB  93% CPU  206948698112 input bytes, (1 open files) VMFiles/3/virtdisk-flat.vmdk

2016-11-11T22:13:08.645+06:00 avtar Info <5286>: 2016-11-11 22:13:08 MST: Increasing size of hash cache from 1048576 to 2097152 elements (adding 25,165,824 bytes).

2016-11-11T22:13:09.139+06:00 avtar Info <5069>: - Writing cache file "/usr/local/avamarclient/var/VmImage7_p_cache.dat"

2016-11-11T22:13:09.385+06:00 avtar Info <5546>: Cache update complete /usr/local/avamarclient/var/VmImage7_p_cache.dat (48.0 MiB of 618 MiB max)

2016-11-11T22:13:09.385+06:00 avtar Info <5122>: 2016-11-11 22:13:09 MST: Cache resize complete.

2016-11-11T22:15:50.037+06:00 avtar Info <8688>: Status 2016-11-11 22:15:50, 12 files, 260.0 GB (12 files, 88.33 MB, 0.03% new) 417MB  92% CPU  279142500352 input bytes, (1 open files) VMFiles/3/virtdisk-flat.vmdk

2016-11-11T22:30:10.584+06:00 avtar Info <7061>: Canceled by '3016-vmimagew' - exiting...

2016-11-11T22:30:10.620+06:00 avtar Info <9772>: Starting graceful (staged) termination, cancel request (wrap-up stage)

2016-11-11T22:30:15.703+06:00 [avtar]  ERROR: <0001> backstreamdir::childdone error merging history stream data during phase_do_hidden while processing directory 'VMFiles/3'

2016-11-11T22:30:15.764+06:00 [avtar]  ERROR: <0001> backstreamdir::childdone error merging history stream data during phase_do_hidden while processing directory 'VMFiles'

2016-11-11T22:30:15.833+06:00 avtar Info <7202>: Backup CANCELED, wrapping-up session with Server

2016-11-11T22:30:15.972+06:00 [avtar]  ERROR: <0001> backstreamdir::childdone error merging history stream data during phase_do_hidden while processing directory ''

2016-11-11T22:30:16.028+06:00 avtar Info <7238>: Stream complete: 347,389,067,264 bytes read from stream

2016-11-11T22:30:16.029+06:00 avtar Info <5157>: PARTIAL Backup #51 timestamp 2016-11-11 22:30:16, 15 files, 5 directories, 323.5 GB (15 files, 88.66 MB, 0.03% new)

2016-11-11T22:30:16.029+06:00 avtar Info <7539>: Label "Servidores Pruebas-Servidores Pruebas-1478925000009", scheduled to expire after 11/18/16 (2016-11-19 05:30:16 UTC), daily backup, backup type: level0_full

2016-11-11T22:30:16.029+06:00 avtar Info <6083>: Backed-up 323.5 GB in 59.50 minutes: 326 GB/hour (15 files/hour)

2016-11-11T22:30:16.031+06:00 avtar Info <7883>: Finished at 2016-11-11 22:30:16 MST, Elapsed time: 0000h:59m:30s

2016-11-11T22:30:16.075+06:00 avtar Info <6149>: Error summary: 3 errors: 1(3)

2016-11-11T22:30:16.075+06:00 avtar Info <8468>: Sending wrapup message to parent

2016-11-11T22:30:16.077+06:00 avtar Info <5314>: Command failed (3 errors, 1 warning, exit code 10013: externally cancelled)

--------------------------------------------------------------------------------------------------------

----- END avtar log 2016-11-11 22:30:16 MST  (1 warning, 3 erros, 0 fatal errors)

--------------------------------------------------------------------------------------------------------

When I google the error message It always shows something related to the backup duration more than a day but in this case it only takes 2 hours.

Regards,

Hi everyone,

I hope you are well today.

As you know last month a security update (v16.00) was made available for 7-Zip:

http://blog.talosintel.com/2016/05/multiple-7-zip-vulnerabilities.html

I have VMware Workstation 12.1.1 installed but it still has version 9.20 of 7za.exe installed located at the following directory path: C:\Program Files (x86)\VMware

Is VMware affected by the issues raised in the above mentioned blog post? If so, is this older .exe file likely to be replaced in an upcoming update to VMware?

Apologies if the appropriate actions for updating this file in a future update are already in progress. Many thanks in advance for your time. Have a good day.

Does anyone know what would cause the SAME user to login into multiples sessions even though we don't allow multiple logins in our View environment?

Currently we have thin clients which are domain joined and when the user log in it is then automatically logged into virtual desktop.

Is it possible to configure Horizon client in a way that when you do logout from VDI that you are also logged out from TC ? And similar if user locks VDI trough start menu that the client also locks ?

What is otherwise the best option to configure Windows thin clients to work seamlessly with horizon and without any local desktop ? Especially when users are using ctr-alt-del key combination or doing lock/logoff. Zero clients are really nice here and give you the best local desktop experience, but they lack on other areas.

Tnx

Will storage vmotion work while moving VMs from ESXi 5.0 datastore cluster to new ESXi 6.0 hosts datastore cluster : without powering off the VMs ?

I am assuming that i am running Vcenter 6 with all these ESXi 5.0 and ESXi 6.0 hosts in the same hosts cluster.

Hello,

Please i have a problem to do a vMotion from host "Rack" (ESXI 5.0, VM version 8, VMFS 5.54) to LAME BLASE server (ESXI 6.0, VM version 11, VMFS 5.61). I added the Rack host to the vCenter and tried to migrate a VM test but got the error message:

The virtual machine requires hardware features that are unsupported or disabled on the target host: """""""""""""* General incompatibilities "
If possible, use a cluster with Enhanced vMotion Compatibility (EVC) enabled; see KB article 1003212.
CPUID details: incompatibility at level 0x1 register 'ecx'.
Host bits: 0110:0010:1101:1000:0011:0010:0000:0011
Required: x000:x01x:10x1:1xx0:xx10:xx1x:xx0x:xx11

It seems incompatible VM hardware, as solution we need to download and install the right VM harware to perform the migration, i'm investigate this issue.

It was a CPU problem version, i enabled the EVC by adding the source host to a new cluster with EVC enabled https://www.youtube.com/watch?v=DSfzafr1ndA an now i don't have the above error message but another error message:

You cannot change the virtual machine's storage placement and its execution host at the same time on this "Source" host 'xxx.yyy.zzz.www'.

I tried to do only storage vMotion or resource vMotion but i see only the source host not the destination host !

Can someone helps me please !

Regards. 

storage vmotion (change host and datastore option) is not working for esxi5.5 hosted vms : it is greyed out and says 'Virtual machine should be powered off to change VM's hosts and datastores'

Hi!

Just registered to ask a simple question

I have some old code laying around which extracts some vm-information using vb.net (vimclient) and puts this data to another database. Works fine for years.

Now my boss asks me to get an info about the used operating system on the guest machines. No problem, got that already (sorry, old vb-code):

--snip--

.GuestOS = vm.Summary.Guest.GuestFullName

                    If vm.Summary.Guest.GuestFullName = "" Then .GuestOS = vm.Config.GuestFullName

--snip--

This works fine til 'Windows Server 2008' or 'Windows 10'. These Operating Systems are reported, but it's 'Edition', e.g. Professional or Enterprise is missing.

So, this is the output of my VM: 'Microsoft Windows 10 (64-Bit)' But it is Windows 10 Enterprise. Same with Windows Server 2008 or 2012.

Question is how to get that edition from vmware? Im using vimclient v5.5. Maybe I should use v6.x? but don't think it will help?!

Thanks for your support!

Regards,

Jan

Небольшая провинциальная бюджетная организация с количеством сотрудников чуть более 30 чел.

Есть 3 сервера, купленные в разное время и несколько (достаточно) разные по конфигурации. Всё самосборное самоварное. Покупалось частями: по одному процу, тройке линеек памяти, паре дисков, потом докупалось потихоньку. Все чётные железки, тем не менее, одних моделей.

Набиты разным количеством дисков: 1 сервер имеет 2+6 SAS дисков (по 450 и 600 Гб); 2 сервер имеет 16 корзин, но установлено только 9 SAS дисков (по 600 Гб); 3 сервер имеет 8 SATA дисков (по 2 Тб). Используются аппаратные RAID'ы уровней 1 и 10.

Вот полная конфигурация этих серверов.

1 сервер:

SuperMicro SC825TQ-R720LPB 720W HS  2U   
SuperMicro X8DT3-F (LGA1366, i5520, 1xPCI-E, SVGA, DVD, SASRAID, 8x HS SAS/SATA, 2xGbLAN, 12DDRIII)
2x CPU Intel Xeon E5645 2.40 ГГц/6core/12Мб/5.86 ГТ/с LGA1366
12x Kingston ValueRAM <KVR1333D3D4R9S/4G> DDR-III DIMM 4Gb <PC3-10600> ECC Registered with Parity CL9
2x HDD 450 Gb SAS 2.0 Seagate Cheetah 15K.7 <ST3450857SS> 15000rpm 16Mb  
8x HDD 600 Gb SAS 2.0 Seagate Cheetah 15K.7 < ST3600057SS> 15000rpm 16Mb
Adaptec RAID 6805 ASR-6805 KIT PCI-E x8, 8-port SAS/SATA, RAID 0/1/1E/10/5/5EE/6/50/60/JBOD, Cache 512Mb

2 сервер:

Server Case SuperMicro < CSE-836E16-R1200B> Black 16xHotSwap SAS / SATA, E-ATX 1200W HS 3U RM
SuperMicro X8DTI-F (RTL)Dual LGA1366< i5520> PCI-E+SVGA+2GbLAN SATA RAID E-ATX 12DDR-III
2x CPU Intel Xeon E5606 2.13 ГГц / 4core / 8Мб / 80 Вт / 4.8 ГТ / с LGA1366
3x Kingston ValueRAM < KVR1333D3D4R9S / 8G> DDR-III DIMM 8Gb < PC3-10600> ECC Registered with Parity CL9
LSI SAS 9211-8i < LSI00194> (RTL) PCI-Ex8, 8-port SAS / SATA 6Gb / s RAID 0 / 1 / 10
9x HDD Hitachi SAS 2.0 600Gb HUS156060VLS600 > 15000rpm 64Mb
2x SSD Kingmax Original SATA-III 120Gb > 2.5" MLC
Intel < EXPI9402PT> PRO / 1000 PT Dual Port (OEM) PCI-E x4 10 / 100 / 1000Mbps

3 сервер:

Server Case SuperMicro < CSE-825TQ-R720LPB > Black 8xHotSwap SAS / SATA, E-ATX 720W HS 2U RM
SuperMicro X9DRE-LN4F (RTL) Dual LGA2011 < C602 > 2xPCI-E SVGA 4xGbLAN SATA RAID E-ATX 16DDR-III
2x CPU Intel Xeon E5-2620 V2 2.1 GHz / 6core / 1.5+15Mb / 80W / 7.2 GT / s LGA2011  
4x Kingston ValueRAM < KVR16R11S4 / 8 > DDR-III DIMM 8Gb < PC3-12800 > ECC Registered with Parity CL11
Adaptec RAID 6805E ASR-6805E KIT PCI-E x4, 8-port SAS / SATA 6Gb / s RAID 0 / 1 / 1E / 10, Cache 128Mb
8x HDD 2Tb SATA 6Gb / s Seagate Constellation ES.3 < ST2000NM0033 > 3.5" 7200rpm 128Mb
2x SSD 240 Gb SATA 6Gb / s Kingston SSDNow KC300 < SKC300S3B7A / 240G > 2.5" MLC

Сейчас на каждом из них стоит Server 2008 R2 с VMware Workstation, на которой работают разные виртуальные сервера: Active Directory (DC1 и DC2), DNS, DHCP, WDS, KMS, WSUS, File Server, Intranet IIS, Dr. Web ES, Garant, Consultant и ещё кое-какие сервисы. Некоторые серверы разнесены по разным хостам (те же контроллеры домена). Многие единичные.

На виртуализацию перешёл давно, как только начал работать в данной организации. До этого был свитч D-Link на 50 портов, лежащий на столе, и два сервака в обычных Tower-корпусах – один на Pentium 3, второй помощнее на на Pentium 4.

На данный момент худо-бедно смог организовать какую-никакую серверную со стойкой 19'', стоечными серверами и ИБП, коммутаторами Cisco. Однако ж, серьёзными вещами, кроме виндовых серверов, не занимался – ESXi и Hyper-V, Linux’ов и BSD не знаю.

В своё время удалось урвать где-то 25 т.р. на покупку VMware vSphere Essentials, поставил на USB-flash, покрутил немного, но так года 3 и не доходят руки заняться.

Прихожу к большому желанию использовать ESXi с общим хранилищем, чтобы можно было делать vMotion – хоть и небольшая организация, но приходится сильно напрягаться, чтобы перезапустить или выключить аппаратный сервер (хост), т.к. пользователи работают с утра до ночи. Особых нагрузок, вроде бы, они не делают – все работают в вордах и экселях, но экселевские таблицы бывают и 50 Мбайт даже в формате xlsb.

Всё это пишу, т.к. мне одному (без эникеев и прочей помощи) приходится делать абсолютно всю работу не только по администрированию указанного выше хозяйства – это считается факультативом и делается вечерами, но и заниматься оф. сайтом, госзакупками, ответами на письма, созданием презентаций и прочих бэйджев, помогать всем и вся, быть на посылках, а также материально ответственным. Поэтому, стараюсь всё максимально автоматизировать, чтобы успевать быстро всё делать.

Вопросы.

1. Можно ли на локальных дисках сделать общее хранилище или надо одного из этих серваков сделать отельным стораджем?

2. Существует ли что-то типа RAID’а по сети, когда диски зеркалируются на разных хостах?

3. Слышал и читал про iSCSI для хранилища – бесплатный вариант самосборного стораджа – может кто посоветовать работающие решения?

How do I need to manage new users on Identity Stores with vRA7?

In vRA6, when I create a users in the Active Directory it became usable automatically in Automation, but with vRA7 I need to "resync" the Identity Store before I can use the new user. Is there any way to set the Active Directory to work as in vRA6?

If I look for the Identity Store using Orchestrator API (to try a forced sync), the Action "getIdentityStoresFromHost" gives me the following error:

Error in (Dynamic Script Module name : getIdentityStoresFromHost#0) Can not perform request to the SSO server. Please contact your System Administrator.

But the SSO server is no longer present in vRA7. How can I force an Active Direcytory sync?

Thanks a lot,

D.

I've recently setup a 3-node + witness (2 nodes contributing storage) vSAN cluster and I'm noticing that on all 3 physical hosts, the 'helper' process is at 100+%RUN.  What could be causing this and how can I troubleshoot to determine the cause?

EDIT:  The one alert I see in the vSAN monitoring tab is 'VSAN Disk Balance' but when I manually kick off a rebalance nothing happens (just hangs at 5%).

After updating a mixture of G7, G8 and G9 VMHosts to 5.5 update 3a and Cookbook release September 2015 (SPP JUN 15). I started having host errors specifically on my G7 hardware. One host went so far as to disconnect from VCenter.

I went the full boat update on the OS to bring it fully in line with HP's recipe. This was the first time hitting drivers in quite a while. So when the first errors started coming in, I immediately suspected the HPSA v106 ( Version:5.5.0.106-1OEM ) which was updated from v50 ( Version:5.5.0.50-1OEM)

VCenter is reporting errors

Lost access to volume 56424481-7f094eb0-8ee6-

80c16e6e15e0 (VMHost_local) due to

connectivity issues. Recovery attempt is in

progress and outcome will be reported shortly.

info 2/2/2015 9:00:45 AM (VMHost_local)

VMKernel.log was reporting some conflict's with claim rules between PowerPath and the NMP for the local disk but that was cleared.

2015-11-29T07:53:04.162Z cpu22:33327)WARNING: LinScsi: SCSILinuxAbortCommands:1843: Failed, Driver hpsa, for vmhba1

Hostd.log

2015-11-30T19:37:48.614Z [248C4B70 info 'Vimsvc.ha-eventmgr'] Event 1820 : Lost access to volume 4ffd89b4-760e9689-81e3-e83935a81a45 (gldpiesx002_local) due to connectivity issues. Recovery attempt is in progress and outcome will be reported shortly.

2015-11-30T19:37:48.615Z [248C4B70 info 'Vimsvc.ha-eventmgr'] Event 1821 : Successfully restored access to volume 4ffd89b4-760e9689-81e3-e83935a81a45 (gldpiesx002_local) following connectivity issues.

I opened tickets with both HP and VMWare

VMWare came back with the first fix which was to upgrade the hpsa driver(hpsa 5.5.0.114-1OEM) which can be downloaded from https://my.vmware.com/web/vmware/details?downloadGroup=DT-ESXI55-HP-HPSA-550114-1OEM&productId=353. however overnight , the errors returned.

HP has suggested back-revving to 5.5.0.74-1(1 Oct 2014) but from a previous discussion here [ Datastore / Disk latency problems with HP ProLiant DL380 G7 - HP Smart Array P410i controller after SPP 2014.09.0 / hpsa-5.0.0.74 update   ]  I believe that was also a bad version.

I'm going to wander down the road a bit and see where it leads and if necessary go back to the 70 or even 50 release

Comments welcome

Is it possible to configure it to only share removable media and nothing elese ? It it possible trough GUI if you remove first option "share your local files", but I need to enforce it to all users. As per documentation there are some registry settings to enable share for certain folders, but nothing equialent to the "allow access to removable storage".

Tnx

This is a bug since years: Copy and Paste fails to work.

When do we get this fixed, VMWare Team ?

I have a datastore I want to create from multiple source luns. Each of the luns is from an SSD storage array, using 6G speed, which allos up to 600MB/sec per lun throughput.

When I try to create the datastore, it seems to concatenate the luns together rather than striping them for improved performance.

The application needs to support 2GB/sec, meaning I need to create a stripe accross 8 of these luns in order to achieve that performance, however, the datastore doesn't seem to allow striping.

Is there a way to fix this so that I can get the necessary performance throughput?

Hi All,

The environment that I'm currently working in has a classification system for emails. It basically means that all emails must have [SEC=UNCLASSIFIED] in the subject line of the email or it is dropped.

Is there a way to edit the email subject lines in vRealize Operation 6.3 alerts and notifications to append [SEC=UNCLASSIFIED]?

I have seen an earlier post (vROPS 6 customizing email alerting) which doesn't answer the question, and I have read the KB (Using custom email templates in VMware vRealize Operations Manager 6.x (2125759) | VMware KB) is a clunky method about building custom templates but with much less granularity and doesn't fit with what I want to do.

Thanks,

Hi again,

I'm running the 6.0 SDK and am attempting to use the HTML bridge (verbatim plugin.xml action to the HTML samples) but I keep getting this error message when I navigate to the plugin's objects view.  Any ideas why I'd be hitting this error on a 5.5 vCenter?  I don't see this error on 6.0 vCenters and I don't see this error if I remove the ActionSpec that uses the className com.vmware.vsphere.client.htmlbridge.HtmlActionDelegate.

Any pointers appreciated! If needed I can try bundling up a sample app to reproduce.

Error Stack

---------------------

TypeError: Error #1034: Type Coercion failed: cannot convert SvtModule@23ef34a31851 to com.vmware.common.interfaces.prioritization.IPrioritizableItem.

    at com.vmware.vsphere.client.prioritization::PrioritizedItemTransformer/transform()

    at ObjectsCreator/onObjectCreated()

    at com.vmware.extensionfw::CallbackUtil$/callback()

    at com.vmware.extensionfw::ExtensionObjectParser/onObjectDeserialized()

    at com.vmware.flexutil::MxmlDeserializer/onThreadTerminated()

    at flash.events::EventDispatcher/dispatchEventFunction()

    at flash.events::EventDispatcher/dispatchEvent()

    at com.vmware.flexutil::PseudoThread/terminate()

    at com.vmware.flexutil::PseudoThread/onTimer()

    at com.vmware.flexutil::PseudoThread/start()

    at com.vmware.flexutil::MxmlDeserializer/xmlToObjectAsync()

    at com.vmware.extensionfw::ExtensionObjectParser/parse()

    at ObjectsCreator/onResourceModulesLoaded()

    at com.vmware.flexutil::ResourceLoader/onModuleLoad()

    at flash.events::EventDispatcher/dispatchEventFunction()

    at flash.events::EventDispatcher/dispatchEvent()

    at ResourceEventDispatcher/moduleInfo_readyHandler()

    at flash.events::EventDispatcher/dispatchEventFunction()

    at flash.events::EventDispatcher/dispatchEvent()

    at ModuleInfoProxy/moduleEventHandler()

    at flash.events::EventDispatcher/dispatchEventFunction()

    at flash.events::EventDispatcher/dispatchEvent()

    at ModuleInfo/readyHandler()

    at flash.events::EventDispatcher/dispatchEventFunction()

    at flash.events::EventDispatcher/dispatchEvent()

    at mx.core::FlexModuleFactory/update()

    at mx.core::FlexModuleFactory/docFrameHandler()

    at mx.core::FlexModuleFactory/docFrameListener()

Hey everyone,

I came across some odd behavior and was wondering if you had any insight.  I have a custom action defined that uses the HTML Bridge.  The custom action is visible and enabled when I install it on a 6.0 vCenter but not a 5.5 vCenter. On the 5.5 vCenter the custom action becomes disabled once the solution menu is displayed.  To rule out any issues with resource keys I hard coded all of the labels.  Are there any common issues that would cause an action to always be disabled?  All menu items share the same constraints. I also tried removing the constraints.  Let me know if there's anything else I can provide that would be helpful.

Note: The actionUrl points to a different plugin that serves the HTML content (i.e. test-html-ui serves the HTML content but the action is defined in test-ui's plugin.xml)

Also: Using the 5.5 SDK

<com.vmware.actionsfw.ActionSpec>

      <uid>com.simplivity.test.customAction</uid>

         <label>Test</label>

           <delegate>

             <className>com.vmware.vsphere.client.htmlbridge.HtmlActionDelegate</className>

             <object><root>

               <actionUrl>/vsphere-client/com.simplivity.test-html-ui/index.html</actionUrl>

               <dialogTitle>Test</dialogTitle>

               <dialogSize>700,500</dialogSize>

             </root></object>

           </delegate>

          </com.vmware.actionsfw.ActionSpec>

Best,

Mike

I need to create a graph from csv file for last quarter for CPU & memory over commit for a cluster.

so say 1st week of July, 2nd week .. for 3 months.

http://www.jonathanmedd.net/2012/01/basic-cluster-vmware-capacity-check-with-powercli.html

also kunal had a script but these are static ones, ie current overcommit number they give

so i am looking for weekly csv file for CPU & Memory overcommit for a cluster

thanks

Hi All, I am trying to get a heatmap view of average latency for datastores for a the past period of time, importantly I need the average over that period of time (to make things look better :) ). From what I can see in the widget there isn't anything there to select time period. An example is in the top 10 widget that lets you select past period and averages the results for that period (as far as I know its an average). thanks...